Whole medical range is available on gcehealthcare.com The manifold MM90 STANDBY is designed to be used as a third source of supply in medical central gas systems. The manifold will deliver gas when the nominal supply system pressure falls below a set level (7 bar). This is a back up source.Together with MM90 STANDBY, always use the MM90 HP unit and alarm providing all alarms according to standard (like Gas alarm). As 2nd stage is recommended to
Compact dual-stage gas supply panel for non-corrosive gases and mixtures up to grade 6.0. For the connection of 1 cylinder with a maximum filling pressure of 300 bar. Diaphragm type regulator and isolation valve. For wall mounting or gas cylinder cabinet mounting For inert, reactive, flammable and oxidizing gases and gas mixtures Excellent and accurate Pressure control Designed to minimize contamination Low internal volume (no dead-s
Compact single-stage gas supply panel for corrosive or toxic gases and mixtures up to purity 6.0. Includes an upstream purge block for inert gas purging, upstream and downstream pressure gauges and a relief valve For the connection of 1 cylinder with a maximum filling pressure of 230 bar (SMD500-26) and 300 bar (SMD530-26). Diaphragm type regulator and isolation valve. For wall mounting or gas cylinder cabinet mounting Excellent and acc
Compact Dual-stage gas supply panel for non-corrosive gases and mixtures up to grade 6.0. For the connection of 1 cylinder with a maximum filling pressure of 200 bar. Diaphragm type regulator and isolation valve. Independent of inlet pressure due to dual-stage set-up For wall mounting or gas cylinder cabinet mounting For inert, reactive, flammable and oxidizing gases and gas mixtures Excellent and accurate Pressure control Desi
Alloy with high silver content (20%) for joining steel/brass/copper pieces. For assembling badly made pieces. Low-temperature brazing in general. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexible coating (it does not crumble when bending the rod). GAZARGENT 20Si is to be used with an oxy-acetylene
Alloy with high silver content (30%) for joining steel/brass/copper pieces. Wide joints in piping, plumbing, climate control and exchangers. Brazing generally at low temperatures. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexible coating (it does not crumble when bending the rod). GAZARGENT 30 is
Alloy with high silver content (40%) for joining steel/brass/copper pieces. Alloy for universal use. Brazing, generally at low temperatures, of copper, copper alloys and all kinds of steel, including stainless. Water/gas pipes. Climate control systems. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexi
Alloy with high silver content (34%) for joining steel/brass/copper pieces. Suitable for delicate assemblies with tight and middle clearances. Good joint filling capacity. Brazing generally at low temperatures. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexible coating (it does not crumble when b
Single-stage line pressure regulator for gases up to purity 6.0. The 4-port version (type 01) Includes a downstream pressure gauge a hand wheel to adjust the line pressure. The 6-port version (type 03) contains an upstream gauge in addition. Optional: a relief valve (AV). Reduces Central Gas Line pressures (upstream) to a lower downstream pressures Suitable for High Pressures up to 300 bar / 4350 psi (Typ FMD530) For inert, reactive, f
Whole medical range is available on gcehealthcare.com MC150 - STABILIZER is a second stage pressure reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units. MC150 - STABILIZER is a second stage reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MC80, MM90 or liquid oxygen tank (LOX)). When there